Recently Viewed Items
Self-adhesive PVC film B1
Item No.: 9200300
Self-adhesive PVC film B1
Item weight: 9.5 Kg
Item No.: 9200300
Availability:
in stock
174.98 € *
Purchase only for registered users
Highly white self-adhesive PVC film with paper backing. Suitable for labels, displays, exhibition panels, construction boards, signboards and for shop-window designs.
Compatibility
Suitable for most Ink Jet plotters using dye- or pigmented inks
Gluing:
The film will stick to any plane and smooth surfaces which are dry and free of dirt, grease, silicon etc. Before gluing it is
absolutely necessary to check that the surface is appropriate to this aim and that it has been prepared (cleaned) professionally.
During gluing the temperature must reach at least 15°C.
If dye inks are used, must be laminated indoor and outdoor to improve light-fastness and smudge-proofness.
It is necessary to protect the surface if it is subject over a long time to abrasion or any other mechanical influences, to dirt or
humidity. The lamination can be done right to the edges or over the edges. The user should check before using what is more
appropriate.
We recommend to use self-adhesive laminating foils for cold lamination. For best results use our Intercoat Protec monomeric overlaminate
Storage:
After printing the remaining roll must be removed from the plotter and stored in its closed original packing in a cool and dry
environment.
Compatibility
Suitable for most Ink Jet plotters using dye- or pigmented inks
Gluing:
The film will stick to any plane and smooth surfaces which are dry and free of dirt, grease, silicon etc. Before gluing it is
absolutely necessary to check that the surface is appropriate to this aim and that it has been prepared (cleaned) professionally.
During gluing the temperature must reach at least 15°C.
If dye inks are used, must be laminated indoor and outdoor to improve light-fastness and smudge-proofness.
It is necessary to protect the surface if it is subject over a long time to abrasion or any other mechanical influences, to dirt or
humidity. The lamination can be done right to the edges or over the edges. The user should check before using what is more
appropriate.
We recommend to use self-adhesive laminating foils for cold lamination. For best results use our Intercoat Protec monomeric overlaminate
Storage:
After printing the remaining roll must be removed from the plotter and stored in its closed original packing in a cool and dry
environment.
*
All prices incl. VAT and excl. Shipping.