Recently Viewed Items
Intercoat Typecut Serie 38 - 3848 ultramarine glos
Item No.: 815203848
Intercoat Typecut Serie 38 - 3848 ultramarine glos
Item weight: 19.0 Kg
Item No.: 815203848
Availability:
not in stock
202.90 € *
Purchase only for registered users
Calandered soft-PVC-film monomeric, cadmiumfree, glossy
Adhesive Copolymeric acrylat
Peel adhesion On glass: ›17 N/25 mm
(24h normal climate 23/50 DIN 50014, Finat 1)
Physical data:
Film thickness: 80 ?m
Flammability:
self-extinguishing (glued to metal)
Temperature resistance:
-30 °C to +90 °C (glued to metal)
Resistant to most mineral oils and fats, fuels, chemicals & solvents aliphatic solvents, mild acids, salt
Application:
All surfaces should be cleaned prior to application with an appropriate cleaner liquid f. e.
alcohol. The sign films of INTERCOAT are easy to weed out and thus are well suited for use in vinyl cutters. Large lettering and graphics may be covered with application tape in one piece which is available at INTERCOAT in six different versions.
If the lettering or graphic covers a large area a wet application may be required to apply a wrinkle free film. For a wet application a light film of water with lowered surface tension (f. e. soap solution) may be sprayed onto the surface. The water between the film and substrate has to be squeezed out with a squeegee also available at INTERCOAT. Due to INTERCOAT adhesives being exclusively water based most commercial remover liquids will neutral size easily the adhesive with the additional advantage of cleaning the underlying surface with the remover acting as detergent.
All recommendations are based on tests and practical experience, but without any warranties.
See more detailed informations at www.intercoat.de
Adhesive Copolymeric acrylat
Peel adhesion On glass: ›17 N/25 mm
(24h normal climate 23/50 DIN 50014, Finat 1)
Physical data:
Film thickness: 80 ?m
Flammability:
self-extinguishing (glued to metal)
Temperature resistance:
-30 °C to +90 °C (glued to metal)
Resistant to most mineral oils and fats, fuels, chemicals & solvents aliphatic solvents, mild acids, salt
Application:
All surfaces should be cleaned prior to application with an appropriate cleaner liquid f. e.
alcohol. The sign films of INTERCOAT are easy to weed out and thus are well suited for use in vinyl cutters. Large lettering and graphics may be covered with application tape in one piece which is available at INTERCOAT in six different versions.
If the lettering or graphic covers a large area a wet application may be required to apply a wrinkle free film. For a wet application a light film of water with lowered surface tension (f. e. soap solution) may be sprayed onto the surface. The water between the film and substrate has to be squeezed out with a squeegee also available at INTERCOAT. Due to INTERCOAT adhesives being exclusively water based most commercial remover liquids will neutral size easily the adhesive with the additional advantage of cleaning the underlying surface with the remover acting as detergent.
All recommendations are based on tests and practical experience, but without any warranties.
See more detailed informations at www.intercoat.de
*
All prices incl. VAT and excl. Shipping.
